PRODUCTS
Products
Integrated products and solutions from online monitoring to offline inspection across three scenarios: blade-clearance safety, smart O&M and non-destructive testing.
01
Clearance Monitoring
Blade Video Clearance Monitoring System
In-nacelle HD cameras plus an edge-computing IPC; computer vision computes real-time blade-tip-to-tower clearance, output at 50 Hz to the controller for protection.
02
Clearance Monitoring
Blade Radar-Vision Clearance Monitoring System
Machine vision fused with 80 GHz FMCW mmWave radar; 98% weather coverage; fused clearance value protects the turbine at 50 Hz in real time.
03
Smart O&M
Wind Lidar
Doppler-shift lidar measuring wind speed and direction across 10 ranges up to 400 m ahead; less affected by wake; helps correct yaw and raise energy yield.
04
Smart O&M
Rotor Imbalance Offline Detection System
Ground-based portable video inspection that detects blade zero-degree deviation and aerodynamic imbalance; 6-hour self-powered; no turbine shutdown required.
05
Smart O&M
Blade Internal Inspection Robot
Vacuum-adhesion wall-climbing robot with AI defect recognition, covering 70% of the blade interior; one cavity inspected in 60 minutes.
06
Non-Destructive Testing
Real-Time 3D TFM Phased-Array Ultrasound System
32:128 channels, 100 fps real-time 3D TFM imaging for M20–M56 bolts, tower welds, main shafts and pitch bearings.
07
Precise Fastening
Smart Axial-Force Bolt Wrench
Ultrasonic force measurement with servo-hydraulic closed loop; 3% F.S.; direct axial preload output; 2/4-channel simultaneous tightening.